Tear-Off, Tear-Out, or Flip Cap

Open-top closure

Big Mouth Vial, 2.0 mL Volume, 12 mm Diameter x 32 mm Height Unassembled Convenience Packs with closures/septa, 10-425 mm Complete components Easy choice Clear or amber vials Components (vial, cap/seal and liner) are packaged, unassembled or assembled, in clear trays or…

Designed to work in the Waters WISP™ 96 position autosampler. Available in clear or amber Type I borosilicate glass, or polypropylene for easy disposal. Vials feature thicker walls for safer sample handling. Limited volume shell vials have a precisely designed conical bottom which permits…

8-425 mm The patented Top Hat™ septa and closure was designed to provide a positive physical lock to assure preassembled components arrive intact. Flat septas also available.

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Designed to work in Agilent (HP) and other autosamplers. Neck finish allows use of standard aluminum seals or Poly Crimp™ Seals. Choose from clear or amber Type I borosilicate glass. Available with graduated marking spots which can be written on with a #2 pencil. 2.0 mL volume, 11 mm seal, 12…

1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top

Mass Spec Vial Test Parameters include: Glass – Type 1, Class A, 33 Expansion Clear or Amber Borosilicate Dimension – Height, Diameter, Bottom Thickness, Neck Length, Thread Profile, Annealing Cap/Septum – Diameter, Height, Thread Integrity, Center Flash, Septa Insertion GC/MS…

PTFE Disk septa are inert chemically inert PFTE Red Rubber septa are economical for many GC applications PTFE/Silicone septa are most popular for HPLC and IC applications Pre-slit septa are easier to pierce with thin gauge needles

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

1.8 mL capacity 12 x 32 mm Screw thread With or without patch Color coded PP caps The ABC Vial™ Convenience Packs include 1.8 mL vials packaged in a recyclable PETE plastic clamshell to help prevent particulate contamination; caps are also included. Vials and ABC Screw…

Pre-assembled caps with Septa 10-425 thread finish

PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for…

Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

Manual hand crimper/de-crimpers for 11, 13, or 20mm aluminum seals and vials. Perfect for chromatography and general crimping needs.

These shell vials are ideal for chromatography applications. White polyethylene plug style needle closures, unattached Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Type I borosilicate glass Clear or amber Accept a variety of seals The Snap Seal™ Vial can be securely sealed with the Poly Crimp™ Seal, an aluminum crimp seal or a variety of Snap Top Cap™ designs.  The unique design provides for a secure seal with any…

1mL 8x35mm vials have a uniform wall thickness and fully annealed top Vials manufactured from chemically resistant, low extractable 33 expansion borosilicate glass Natural color virgin polyethylene push-in caps are included in each kit Meet or exceed original equipment manufacturer’s requirements

Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to…

Preassembled aluminum seals reduce contamination during sample preparation and save valuable time in the lab.

Sample vials with PTFE-lined storage caps Available in clear or amber glass Each carton contains shrink-wrapped vials and PTFE-lined caps in plastic bags

Largest opening Closures are ideal for autosamplers requiring closure to support or hang vial in tray such as Hitachi, Jasco, Shimadzu, etc. Larger opening provides increased target area for needle penetration. Available in a wide assortment of colors. The Top Seal™ closure…

Interlocked™ Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial while still providing a tight fit for good sealability.

Screw Top Convenience Packs are an easy way to get 500 of each component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, 500 screw top vials and screw caps with septa installed are kept handy and dust-free. Agilent Technologies products are intended for…

Manufactured from Type I borosilicate glass Screw thread finish eliminates the need for crimping tools Accept 18mm screw thread closures with septa For use with CTC Analytics Systems requiring magnetic closures Also compatible with modern Agilent, Perkin Elmer and Tekmar autosamplers that…

Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials…

Each Convenience Pack includes 100 vials and 100 aluminum seals Choice of three liners

Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature heavier walls for safer handling. Available with marking spots.

Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.